HINO J08E J05E 8MM Engine Cylinder Liner Kit S130A-E0100-88 For SK330-8/SK350LC-8 Diesel Engine Parts S130A•E0100

Working principle:

The piston is the "heart" of the automobile engine, which bears alternating mechanical and thermal loads. It is one of the key components in the engine with extremely poor working conditions. The role of the piston is to withstand the gas pressure, through the piston pin transfer to the connecting rod, drive the crankshaft rotation. The top of the piston is also part of the combustion chamber. ​

The aluminum piston expands greatly when heated, and the piston pin should be installed in the piston pin hole with a certain tightness at room temperature. When installing, the piston should be preheated to about 90℃ in oil or water, then take out the piston, and push into the piston pin hole smoothly with the piston pin (pay attention to the assembly direction).

Maintenance of excavator:

(1) Maintenance above 4000h. Add the check on the water pump every 4000h. Replace the hydraulic oil every 5000h.

② Long-term storage. When the machine is stored for a long time, in order to prevent the piston rod of the hydraulic cylinder from rusting, the working device should be placed on the ground; The machine should be cleaned and dried and stored in a dry indoor environment. Park the machine on a well-drained concrete floor; Before storage, fill the tank, lubricate all parts, replace the hydraulic oil and oil, coat the exposed metal surface of the piston rod of the hydraulic cylinder with a thin layer of butter, remove the negative terminal of the battery, or remove the battery and store it separately; Add appropriate proportion of antifreeze in cooling water according to the lowest ambient temperature; Start the engine and operate the machine once a month to lubricate the moving parts and recharge the batteries at the same time; Turn on the air conditioner and run it for 5-10 minutes.

Application of J08E J05E 8MM Engine Cylinder Liner Kit:

Excavator

Tractor

Forlift

Crane

Marine

Agricultural Machine

Advantage of Engine Cylinder Liner Kit

• Greater resistance. Making liners separately from the engine block allows the use of special higher performance materials than those used for the construction of the block itself. Liners are generally made in special cast iron alloys containing elements with natural lubricating properties, like graphite. Other components are added like chrome, vanadium, and molybdenum to help ensure resistance to corrosion and wear caused by high temperatures.

• Easier maintenance. When liners are worn they can be replaced more easily than changing an entire cylinder block.

• Higher thermal conductivity. At operating temperatures the liners heat up more than the cylinders and must be able to expand in both diameter and length. If they were cast together with the cylinders, the resulting thermal loading would be high enough to fracture the materials.

• Less risk of defects. The more complex a casting, the more difficult it is to achieve perfectly even surfaces with low residual stresses.

Services&Advantage of Our Company:

The whole production process from raw material to finish product is under a strict quality control. All the product comply with IATF16949:2020 /ISO9001:2008. We are strict with the quality of products, we stick to provide high-quality products and best services to customers and attach great importance to the material and manufacturing technique of products to ensure the interests of our customers!

FAQ

1. Q: Do you provide this sample? Is it free or extra?

A: Yes, we provide sample service for some of our products for free charge but need to pay the cost of freight.

2.Q: Are you a trading company or manfacturer?

A: We are a professional single cylinder diesel engine parts sales, production of some products, we have professional engineers, research diesel engine structure for many years.

3.Q: What's your idea about the mode of shipping?

A: Our prices are usually wholesale from the factory. We can offer you FOB or CIF quotation according to your requirements.Or use international express delivery DDP.The buyer may also specify the mode of shipment.The goods will arrive in about 10-20 days.

4.Q: What is your terms of packing?

A: Carton package ,factory pakage, neutral package, export standard carton package,or as requirement.

Guangzhou TP Cloud Power International Construction Machinery Co., Ltd, in【Starting with the apex technology of power machinery, challenge infinte possibility, providing superior technology and high value products to the world, committed to creating a cleaner and more comfortable earth society】, through research & development, production, sales of excavator engine parts, achieved sustainable development.

Our main products include various powder metallurgy parts such as piston rings, cylinder liners and powertrains for excavator engines, we through using lead step technology development for the overwhelming majority of customers with low cost has the original value of the products, in order to realize the engine such as lightweight, low fuel fee【environmentally friendly engine manufacturing】has made a contribution. We pursuit the highest quality, by the world's first-class speed, manufacturing world-class products efficiently.